Engine Specifications
33S877-0019-G1
Engine Specifications
| SKU |
33S877-0019-G1 |
| Model/Type/Trim |
33S877-0019-G1 |
| 6 Pin Connector |
With |
| Air Cleaner |
Cartridge with prefilter |
| Air Cleaner Color |
290 Satin Black |
| Alternator |
9 amp |
| Carburetor |
Choke-a-matic/Rem Choke Screw |
| Casing Clamp |
Installed with 1/4″ Gap |
| Controls |
Equip for Remote |
| Crankshaft |
Straight 3.157″ PTO |
| Crankshaft Details |
1/4″ Keyway, 7/16-20 D&T |
| Emissions Certification |
EXH/EU |
| Engine Base |
Equip for Oil Pressure Switch |
| Engine Idle Speed |
Governed Idle 1750 +/- 100 RPM |
| Engine Package |
Professional Series |
| Engine Sold In |
B&S Eng Replacement – USA/CAN |
| Engine Speed |
3400 +/- 0100 RPM – No Load |
| Flywheel |
Heavy – Cast Iron |
| Fuel Line |
3.5″ with 40 Micron Filter |
| Fuel Pump |
Integral |
| Fuel Shutoff |
Without |
| Label Power |
EX1900 Durable |
| Lubrication |
Full Pressure Lube |
| Muffler Guard |
Without |
| Oil Drain |
Plug |
| Oil Filter |
Standard |
| PTO Bearing |
High Radial Load |
| Purge Port |
Low Vacuum |
| Regulator |
With |
| Spark Plug Boot |
Standard With Wire Sleeve |
Technical Specifications
| Model Series |
33S8 |
| Engine Series |
5210 |
| Displacement |
540 |
| Oil Capacity |
48 oz (1.42 l) |
| Valve Configuration |
OHV |
| Flywheel Torque |
95 lb/ft (128.8 Nm) |
| Governor Arm Torque |
50 lb/in (5.6 Nm) |
| Carb Mount |
70 lb/in (8.0 Nm) |
| Plug Gap |
0.03 in (0.76 mm) |
| Intake Valve |
.003-.005 in (.08-.13 mm) |
| Exhaust Valve |
.005-.007 in (.13-.18 mm) |
| Idle Speed |
1750 |
| Air Gap |
.010-.014 in (.25-.36 mm) |
| Flywheel Puller Part |
19203 |
| Flywheel Holder Part |
19433 |
| Connecting Rod Torque |
150 lb/in (17.0 Nm) |
| Sump Torque |
240 lb/in (27.1 Nm) |
| Head Torque |
250 lb/in (28.0 Nm) |
| Top No Load (rpms) |
3400 |
Alternator Specifications
| Alternator |
592829 |
| Type |
5 adc / 9 adc / Tri-circuit |
| Testing RPM |
3600 |
| AC Volts |
28 / 40vac / 28 |
| DC Amps |
2-5 amp / 2-9 amp / 5 amp +DC, 5 amp -DC |
